Rack elicoidale
A helical gear rack is a mechanical component consisting of a straight toothed rack and a helical gear. The rack features linear teeth that mesh with the helical gear’s angled teeth to convert rotational motion into linear motion or vice versa.
A helical gear rack is a mechanical component consisting of a straight toothed rack and a helical gear. The rack features linear teeth that mesh with the helical gear's angled teeth to convert rotational motion into linear motion or vice versa.
funzioni:
The primary function of a helical gear rack is to convert rotary motion into linear motion (or vice versa) with high efficiency and precision. It provides a mechanism for linear positioning, motion control, and power transmission in various mechanical systems.
Module | L | L2 | Dente No. | B | A0 | A1 | D | I | Bucu No. | A | C1 | C2 | E | D1 | I1 | C3 | Errore di pitch / 300 mm |
1 | 1000.00 | 3.14 | 300 | 15 | 15 | 14 | - | - | - | - | - | - | - | - | - | - | 0.02 |
1.5 | 1000.00 | 6.7 | 200 | 19 | 19 | 17.5 | 62.5 | 125 | 8 | 8 | 7 | 11 | 7 | 31.7 | 936.6 | 5.7 | 0.03 |
2 | 1000.00 | 8.5 | 150 | 24 | 24 | 22 | 62.5 | 125 | 8 | 8 | 7 | 11 | 7 | 31.7 | 936.6 | 5.7 | 0.031 |
2.5 | 1000.00 | 8.5 | 120 | 24 | 24 | 21.5 | 62.5 | 125 | 8 | 9 | 7 | 11 | 7 | 31.7 | 936.6 | 5.7 | 0.033 |
3 | 1000.00 | 10.3 | 100 | 29 | 29 | 26 | 62.5 | 125 | 8 | 9 | 10 | 15 | 9 | 35.0 | 930.0 | 7.7 | 0.035 |
4 | 1000.00 | 13.8 | 75 | 39 | 39 | 35 | 62.5 | 125 | 8 | 12 | 10 | 15 | 9 | 33.3 | 933.0 | 7.7 | 0.038 |
5 | 1000.00 | 17.4 | 60 | 49 | 39 | 34 | 62.5 | 125 | 8 | 12 | 14 | 20 | 13 | 37.5 | 925.0 | 11.7 | 0.04 |
6 | 1000.00 | 20.9 | 50 | 59 | 49 | 43 | 62.5 | 125 | 8 | 16 | 18 | 26 | 17 | 37.5 | 925.0 | 15.7 | 0.042 |
8 | 1000.00 | 28.7 | 36 | 79 | 79 | 71 | 60 | 120 | 8 | 25 | 22 | 33 | 21 | 120.0 | 720.0 | 19.7 | 0.045 |
10 | 1000.00 | 35.11 | 30 | 99 | 99 | 89 | 62.5 | 125 | 8 | 32 | 33 | 48 | 32 | 125.0 | 750.0 | 19.7 | 0.052 |
vantaghji:
1. Increased Load Capacity: The helical gear's inclined teeth engage more teeth simultaneously, distributing the load over a larger contact area. This leads to improved load-carrying capacity compared to straight-toothed racks.
2. Smooth and Quiet Operation: The helical gear's angled teeth enable gradual and continuous engagement, reducing noise and vibration during operation.
3. Higher Efficiency: The helical gear rack design minimizes sliding friction, resulting in higher efficiency and reduced power loss.
4. Improved Accuracy: The helical gear rack's helix angle allows for finer positioning and greater accuracy in linear motion applications.
5. Versatility: Helical gear racks can be used in a wide range of applications, including CNC machines, robotics, industrial automation, printing presses, and material handling systems.
prucessu | Lavorazione, forgiatura, fusione, taglio |
Matière | C45 (1045), A3 (acciaio à pocu carbonu), 40Cr, 20CrMnTi, 42CrMo, ghisa, ghisa ductile, rame, acciaio inox, è cusì, cum'è avete dumandatu |
Trattamentu termicu | Tempra ad alta frequenza, carburazione, pallinatura, tempra e rinvenimento, nitrurazione |
Trattamentu di superficia | Sò nero, zincatura a caldo, cromatura dura, zincatura, galvanica, nichelatura, sabbiatura, pittura a colori, rivestimento Dacromet, rivestimento in polvere, è esigenze di i clienti. |
danza | Longa vita, Alta precisione, Alta resistenza à l'usura, Alta resistenza, Bassu rumore, Liscia è stabile, Resistenza à a fatigue |
mudeddu | Standard ANSI, DIN, JIS, Non-Standard, Ingranaggi cilindrici, Ingranaggi elicoidali, Ingranaggi conici diritti, Ingranaggi conici a spirale, Ingranaggi a vite senza fine, Cremagliere |
Packaging | I prudutti sò imballati cù cura, sacchetti di plastica interni è scatuli di cartone esterni o esigenza di u cliente; dopu un trasportu longu o un magazinu longu, apre u pacchettu; marca nova, senza danni, senza ruggine. |
Travaux
Helical gear racks find application in various industries and equipment, including:
- CNC milling machines and lathes for precise linear positioning.
- Robotic systems for controlled linear motion.
- Conveyors and material handling systems for transporting goods.
- Printing presses for accurate paper feed.
- Automotive and aerospace industries for actuation and positioning systems.
When your machine's precision motion drive exceeds what can easily and economically be achieved via ball screws, rack and pinion is the logical choice. Our products are precision ground and meet AGMA 9 specs. Best of all, our gear rack has indexing holes and pre-bored mounting holes. That saves you lots of time, hassle and expense. Just bolt it to your frame.
Se a vostra lunghezza di viaghju hè più di quella chì si pò uttene da una sola lunghezza di rack, ùn ci hè prublema. L'estremità machinate di precisione permettenu di buttà pezzi supplementari è cuntinuà.
Precautions and Installation/Maintenance
1. Proper Alignment: Ensure proper alignment between the helical gear rack and the mating gear or pinion for smooth and efficient operation.
2. Lubrication: Apply appropriate lubrication to reduce friction and wear between the gear rack and the mating gear.
3. Regular Inspection: Regularly inspect the gear rack for signs of wear, damage, or misalignment. Replace or repair any worn or damaged components promptly.
4. Cleanliness: Keep the gear rack and mating gear clean from debris, dust, and contaminants to maintain optimal performance.
5. Proper Handling: Handle the gear rack with care to avoid any physical damage or deformation that could affect its functionality.
In order to make the assembly of connected racks smoother, half teeth are added to both ends of the standard rack to facilitate the connection of the lower half teeth of the next rack with the complete teeth. The picture below shows the connection method of two racks. The tooth gauge can accurately control the pitch position.
For the connection of helical racks, the opposite tooth gauge can be used to accurately connect.
1. When connecting the rack, it is recommended to lock the holes on the side of the rack first, and then in the order of the foundation. By assembling the tooth gauge, the pitch position of the rack can be assembled accurately and completely.
2. Finally, lock the rack positioning pins on the two racks; assembly is complete.
À propositu di EVER POWER
EVER POWER hà una ricca sperienza in a persunalizazione di diverse cremagliere di ingranaggi spur è cremagliere di ingranaggi elicoidali, cum'è rack di plastica, cremagliera in acciaio inox, metal helical gear racks, cremagliera lineare e rack di ingranaggi per ascensore. A nostra fabbrica pò ancu pruduce rack di ingranaggi elicoidali in nylon è rack è pignoni elicoidali di plastica. Semu piacè di offre servizii prufessiunali per a fabricazione di cremagliera è pignone. Sè avete bisognu di disegni persunalizati, per piacè cuntattate cun noi.
In più di a cremagliera, a nostra sucietà furnisce ancu diversi prudutti di parti di trasmissione, cum'è riduttori agriculi, arburi pto, catene e pignoni, cilindri idraulici, cumpressori d'aria, machini arnesi è altri prudutti. I clienti sò benvenuti à dumandà nantu à i prudutti persunalizati.
Additional nantu à u corsu
modifica | da hyw |
---|
Dettaglio Rapidu di u Produttu:
- Standard è non standard dispunibili
- Cù alta qualità è prezzu cumpetitivu
- Pronta spedizione
- Imballaghju secondu a dumanda di u cliente.
Avemu prumessu chì offre u megliu prezzu per l'alta qualità in porcellana! Accettemu dinò un ordine speciale per i prudutti. Se site interessatu à i nostri prudutti. Per piacè ùn esitate micca à fà ci cunnosce. Semu felici di dà l'infurmazioni dettagliate. Promettemu chì i nostri prudutti saranu sicuri è eranu in alta qualità è prezzu raghjone. Se site interessatu à i nostri prudutti, per piacè cuntattateci subitu.Seremu sinceramente in cerca di a vostra cooperazione.
A maiò parte di i nostri prudutti sò spurtati in Europa o in America, tramindui prudutti standard è micca standard dispunibili. Pudemu pruduce secondu u vostru disegnu o campione. U materiale pò esse standard o secondu a vostra dumanda speciale. Se sceglite noi, sceglite affidabile.
Materiali dispunibili
1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass: C36000 (C26800), C37700 (HPb59), C38500 (HPb58), C27200 (CuZn37), C28000 (CuZn40)
4. Bronzu: C51000, C52100, C54400, ecc
5. Ferru: 1213, 12L14,1215
6. Aluminium: Al6061, Al6063
7.OEM secondu a vostra dumanda
Trattamentu di superficia
Annealing, canonizazione naturale, trattamentu termicu, lucidatura, nichelatura, cromatura, zincatura, passivizazione gialla, passivizazione d'oru, raso, superficia nera dipinta ecc.
Metudu di prucessione
Usinatura CNC, punch, tornitura, fresatura, foratura, macinatura, brocchiatura, saldatura è assemblea
QC & Certificatu
I tecnichi si verificanu propiu in a produzzione, verificate l'ultimu prima di u pacchettu da un ispettore di qualità prufessiunale
ISO9001: 2008, ISO14001: 2001, ISO / TS 16949: 2009
Package & Lead Time
Dimensione: Disegni
Cassa / Contenitore di Legnu è paletta, o secondu e specifiche persunalizate.
Campioni 15-25days. 30-45days ordine ufficiale
Portu: portu di Shanghai / Ningbo